How to use 3D laser foot scanner

The 3D laser plantar scanner is a high-tech device that quickly scans the size of the plantar and 3D models.

It uses non-contact laser scanning, intelligent voice-guided operation, fast scanning speed, and usually only takes 5-30 seconds to complete the test.

The operation of the 3D laser plantar scanner is as follows:

1. Before use, check whether the power supply of the device is connected normally to see if the device can be turned on normally. Check whether the corresponding USB connection is normal. After turning on the computer, open the scanning software inside to see if it can be opened normally.

2. Clean the device to make it clean and create a comfortable environment for the tester.

3. Before the test, the tester needs to take off his shoes and socks and stand barefoot in the scanning sensing area of the plantar scanner. During the standing process, keep the body relaxed and natural, look straight ahead, and keep the body balanced.

4. After preparation, click the start button on the software, and then wait for the automatic test of the scanner.

5. Some devices are single-foot tests, and you need to rotate your feet for measurement. For example, after measuring the left foot, wait for the device voice prompt, and adjust the right foot to the scanning area for testing.

6. After measuring, remember to export the measurement report. Some devices support mobile phone scanning and downloading, some need to be sent to your mobile phone through other transmission methods, or they can be printed on the spot.

7. After the test is completed, save the measurement report. If you are sensitive to your privacy, you must explain to the staff in person to delete your relevant data information on the spot.

In fact, the operation of the plantar 3D scanner is very simple. Generally, the on-site staff can operate it independently after a little guidance, and there is voice guidance. The entire scanning process is within tens of seconds, and the measured data is also very rich.

It can generate three-dimensional data such as stl, and can also generate detailed measurement reports. It can evaluate flat feet, high arches, etc., and can also intelligently select shoe sizes, etc.