What are the methods of using the plantar pressure distribution system of gait equipment?

The plantar pressure distribution system of the gait equipment is also referred to as the plantar pressure distribution system.

This device mainly measures the pressure distribution of each area of the sole of the foot through the principle of pressure sensor.

When a person stands still or walks on it, the pressure sensor in the plantar pressure plate will sense it in real time, and convert the sensed data into digital signals, and present it in the form of charts and other methods through computer software, and also generate detailed data reports.

How to use the plantar pressure distribution system:

1. Static measurement: The tester stands still in the sensing area on the pressure plate, and then clicks the static test button on the software to start the test. During the test, the tester should keep the body relaxed and natural, stand still, and the static measurement generally only takes 3-5 seconds.

2. Balance measurement. The tester wears socks or stands barefoot in the sensing area, and then asks the staff to click the balance measurement button on the software to test. The measurement process is the same as static measurement, except that the calculation method and the measured data items are different.

3. Dynamic measurement. After the staff clicks the dynamic measurement button on the computer software, the tester needs to walk back and forth 3-5 times on the sensing area of the pressure plate, and finally click the end test button to complete the test. The whole process generally takes about 5-15 seconds.

After the test is completed, the measured data and report can be viewed online on the software. We can intuitively understand our plantar pressure distribution information, step frequency, center of gravity movement trajectory and other parameters. We can also directly understand whether our feet have flat feet, high arches and other foot abnormalities through software analysis.

These data reports can be printed directly on site or sent to our mobile phones for storage. These data can be reused in the short term and can also be used in insole customization and other aspects.

If for privacy needs, we will delete the user measurement report and other information on the computer in a timely manner in front of the user after the measurement and after the user obtains the report, so that the user can feel more at ease.