The process of making corrective insoles using foot 3D scanner, 3D printer and engraving machine

Corrective insoles are insoles that can assist in correcting flat feet, high arches, inversion, valgus and other foot defects.

The process of making corrective insoles through foot 3D scanner, 3D printer and engraving machine:

1. Collect foot data through foot 3D scanner. The whole process usually takes only 20-30 seconds, which is very fast and efficient. This is a high-tech device with data accuracy of up to 0.5mm.

In the process of collecting data, you usually have to stand still on the scanning instrument. During the test, you should keep your body relaxed and natural, so that the data obtained is closest to the truth.

2. Collect plantar pressure distribution through plantar pressure distribution system.

When conducting plantar pressure distribution test, it is recommended to collect data multiple times and find similar data for analysis and reference.

3. The insole rehabilitator imports the three-dimensional data in stl and other formats measured by the foot 3D scanner into the insole design software, and then analyzes it in combination with the data measured by the plantar pressure distribution system, and then optimizes and designs the support of the insole.

4. After the insole is designed, export the data, and then import the designed time into the 3D printer or insole engraving machine to make the insole.

5. After the insole is made, it needs to be veneered and polished according to the customer's needs.

6. After the insole is made, it needs to be delivered to the customer by express delivery.

In addition, it is recommended to regularly track the correction effect of the customer after wearing the insole, so that better optimization can be carried out.