Common Application Scenarios of Plantar 3D Scanners

The plantar 3D scanner uses the principle of laser scanning to measure the sole of the human foot.

It can measure data such as arch height, foot width, and foot length.

The data format includes three-dimensional data such as stl, which can be directly imported into a 3D printer or insole engraving machine to make insoles.

The plantar 3D scanner can also evaluate flat feet, high arches, etc. The evaluation can be exported in the format of document or PDF, which is convenient for customers to check and view.

The most common application scenarios of plantar 3D scanners:

1. Evaluate the health of the feet.

For example, evaluate whether the human body has flat feet, high arches, etc.

These evaluations are based on detailed and specific data.

The data measured by the plantar 3D scanner can generally reach 0.5mm, the data is accurate, and the scanning speed is very fast, only tens of seconds are needed.

With scientific data as the evaluation basis, the evaluation results will be accurate and reduce the misjudgment.

2. Application in the production of corrective insoles.

After measuring the tester's foot, detailed three-dimensional data will be obtained.

The rehabilitation therapist can directly import this 3D data into the insole design software.

At the same time, personalized design can be carried out according to these data, such as corresponding design for flat feet, high arches, etc.

The corrective insoles designed in this way are effective and can maximize the improvement of human foot health.

Of course, corrective insoles are only suitable for mild flat feet, high arches, etc.

If the foot problem is more serious, it is necessary to go to the hospital for treatment through surgery or other means.